Solar Deck Light FAQ

Top FAQs:

My lights are not turning on anymore? As the batteries that are installed with the light are recharged via the solar panel on top, it’s important that the light unit be exposed to sunlight for at least 6 hours per day. This is especially important if they’re activated often during the night. If your lights are in shadow at any time of the day, move them to a location that gets at least 6 hours of sunlight. Also, you’ll want to make sure that the DIP switches in the back of the unit are set to the same number, so when one unit detects motion, the other is activated.

What are those small white switches on the back of the light next to On/OFF switch? These two deck lights come with the Device Address switch (1) preset to be synched upon initial use. When one light detects motion, both lights turn on. To connect additional lights to this set, ensure the Device Address switches (1) are all set to the same setting.

FAQs For Model: LS-201B-SOPL-2

Can you control the sensitivity of the lights coming on? The sensitivity is set and cannot be changed. Our Deck lights will only give off a warm white, 3000K light when activated.

Is there a way to get the lights to be on without movement? Always on at night? This particular light set is designed only to activate when motion is detected. (Solar-powered lights typically aren’t good for all night illumination.). The best option for an all-night light would be a hard-wired or low-voltage connected light.

Do the lights turn on in the daylight? The light is designed to turn ON in low light or darkness, and only when motion is detected.

Is there a maximum number of lights that will work together? There is no maximum number of lights. You can connect as many as you like, feel free to contact our Customer Care Department with any other questions you might have.

Are there any “height” limits for the sensors? It’s recommended to set the deck lights in a place where they receive plenty of sun each day. It’s important to take seasonal changes into account when determining the placement of your solar panels. When it comes to height, we recommend mounting the deck lights at a 7ft or 8ft to make sure the sensor can read motion sensing. However, there are cases where customer install the lights on the ground and that can work as well. Just make sure the solar panel is receiving plenty of sun.

Are you able to mount these lights without using a drill and screws? The included hardware is designed specifically for the light, for proper installation, use, and access to the battery and DIM switch. You can use other methods (ie. mounting tape, hooks), but they may not be as reliable, or allow for easy access to the light. Whichever method you select, avoid blocking the motion sensor, or covering the solar panel, as this will reduce the light's functionality.

Is the advertised 300 lumens each light (total 600), or 300 across the pair (150 each) when both are on? Each motion sensing light is 300 Lumens.

Are the 8 hours of light on time or only 8 hours of motion sensing time? In the northeast, winter darkness is roughly 6pm to 6am which is 12 hours. Will I have motion sensing for only 8 hours max? The deck lights will operate a total of 8 hours and that is with the light turning on and with the motion sensor detecting motion on a full charge.

What is the Warranty for the Deck Lights? 2-year limited manufacturer's warranty.

What is the distance for motion detection? Detects motion up to 30 ft. away, activating for 10-seconds.

What is the lumen for each deck light? Each deck light will have 300 Lumens.

Entering a few keywords into the Search field below will yield the best results. (i.e., If you're wondering why your light is flashing, enter "flash".)

Does Novolink offer an installation service?  No, we do not have an installation service, and recommend using a professional electrician when installing Wall Pack or Recessed lighting.

Where can I purchase Novolink products?  Novolink products are sold online at shopNovolink and Home Depot.